Published exterior dimensions do not show whether a Coolray fits a particular family, passenger or cargo task.
Define the decision
The current official New Coolray page lists an overall length of 4,380 mm, width of 1,810 mm, height of 1,615 mm and a 2,600 mm wheelbase, while warning that regional vehicles may differ. Use those values only to identify the referenced market family. Measure the actual candidate for occupant and luggage decisions. If family equipment is essential, perform a child-seat and pushchair fitting trial before treating rear legroom or quoted luggage volume as sufficient evidence.
Evidence to collect
Set the front seats for the intended drivers, then test rear knee, foot and head clearance. Check door opening, child-seat anchor access, seat-belt reach and the effect of a rear-facing child seat. Measure boot opening width and height, load-floor length, narrowest width, load lip and the usable space with required seats occupied.
Risk and export exposure
Cargo litres alone cannot describe wheel-arch intrusion, a sloping tailgate, parcel-shelf position or spare-wheel equipment. A panoramic roof, powered tailgate or different seat trim can alter headroom, convenience or repair exposure. Available volume also does not equal legal payload.
Apply it to a candidate
Bring the actual suitcases, stroller, mobility device, tools or sample cartons when possible. Confirm payload and axle limits from candidate documents, include passengers and accessories in the load calculation, and test whether frequently used cargo can be secured without obstructing visibility.
Build the VIN record
Create a dated folder named by VIN. Record exact body version, driver and rear-seat fit, child-seat access with source documents, photographs, diagnostic output or inspection results. Keep measured boot opening, payload documents, real cargo trial as named actions until the responsible reviewer closes them. A replacement vehicle starts a new file rather than inheriting another candidate's evidence.
Independent review
Assign each field to a reviewer with the relevant competence. Technical, legal, shipping and destination questions should not be answered by one general seller statement. If records conflict, preserve both versions and request the exact document, test or image that resolves the difference before payment.
Commercial hold points
Connect payment to evidence. Confirm identity before reservation, condition before final technical acceptance, contract wording before a major transfer and loading condition before handover. A changed VIN, beneficiary, delivery point or accepted exception reopens the relevant approval gate.
Arrival and ownership control
Freeze the odometer, warning state, keys, accessories, body condition and unresolved exceptions before loading. Compare the arrival vehicle with that record before cleaning or repair. Preserve evidence for claims and give the destination workshop the exact version, service and diagnostic baseline.
Translate uncertainty into a specific next action
For published exterior dimensions do not show whether a coolray fits a particular family, passenger or cargo task., avoid labels such as “looks fine” or “probably standard.” An open question should request a precise VIN photograph, legal record, diagnostic result, measured value, road-test observation or written destination answer. Assign the request and a deadline. If the missing evidence can change safety, legality or a high-cost repair, do not release payment while it remains open.
Prepare the destination handover
The receiver needs the legal identity, keys, manuals, service evidence, diagnostic baseline, accepted condition and outstanding actions. Include the decisions behind measured boot opening, payload documents, real cargo trial. A workshop that can see the pre-shipment state is less likely to order the wrong part, repeat diagnosis or confuse a transport issue with an earlier defect.
Write the approval result
Finish with pass, hold or reject. A hold must name the missing evidence, owner and deadline. Approval means the buyer understands the remaining limits; it does not turn an unknown into a confirmed feature or remove destination responsibility.
Record the evidence date and the person who reviewed it. If a candidate changes, repeat the affected checks instead of carrying an earlier approval to another VIN, model year or seller.
Geely Coolray Interior, Rear Seat and Boot Space: checklist
Mark every item confirmed, unresolved or rejected and link its evidence to the candidate VIN.
- Exact body version
- Driver and rear-seat fit
- Child-seat access
- Measured boot opening
- Payload documents
- Real cargo trial
Primary manufacturer references
Use these sources for context only; the candidate remains market-, year-, trim- and VIN-specific.
Geely New Coolray official model page ↗Measure the task instead of relying on a segment label
Set the seats for real occupants, load the buyer's normal luggage and record the measurement points. Confirm the body in the market-specific specification guide, compare an alternative through the Coolray versus Jolion space decision, and include required accessories in the candidate brief.
Buyer questions
What size is the current New Coolray?
Geely lists 4,380 mm length and a 2,600 mm wheelbase for the referenced version, but regional specifications can differ.
How large is the Coolray boot?
Confirm the exact market version and measure the shape for the buyer’s real luggage rather than relying on an unmatched figure.
Is cargo volume the same as payload?
No. Payload is a weight limit taken from the vehicle documents and labels.